EN - 10
4
.3. Test Strip
Run water
through the
tap (1min.)
Keep the
strip in the
water (1sec)
Shake the
strip.
Wait
(1min.)
Set the hardness level of
your machine.
1
2
3
4
5
6
NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.
4
.4. Water Hardness Table
Level
German dH
French
dF
British
dE
Indicator
1
0-5
0-9
0-6
L1 is seen on the display.
2
6-11
10-20
7-14
L2 is seen on the display.
3
12-17
21-30
15-21
L3 is seen on the display.
4
18-22
31-40
22-28
L4 is seen on the display.
5
23-31
41-55
29-39
L5 is seen on the display.
6
32-50
56-90
40-63
L6 is seen on the display.
4
.5. Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4
.6. Setting
• Press the programme button
when the machine is turned off.
• Turn the machine on by pressing the On/Off button and continue to press the
programme button for at least 3 seconds.
• If “Hardness set” is recognized “SL” is shown for 2 seconds.
• Release the programme button. The lcurrent setting can be seen.
• Press the programme button to set the desired level. Pressing the programme button
cycles through the hardness levels from 1 to 6.
• Once the desired level has been reached, turn the machine off to store the
selected setting.
4
.7. Detergent usage
Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
