EN-14
CHAPTER -4: PREPARING THE MACHINE FOR USE
Adjusting salt consumption
• Press program button
(2)
when the machine is off position.
• Turn on the machine by pressing On/Off button
(1)
and continue to press program button
(2)
at
• least for 3 seconds.
• If “Hardness set” is recognized “SL” is shown for 2 seconds.
• Release program button
(2)
. The last setting level is viewed.
• Press program button
(2)
to set the desired level.At any pressure of program button hardness
• level is incremented. Hardness level 1 returns after hardness level 6.
• The last selected water hardness level is stored in the memory by turning the machine off
• with On/Off button
(1)
.
Detergent usage
Use a detergent specifically designed for use in domestic dishwashers.
You can find powder,gel,and tablet detergents that have been designed for household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry
places out of reach of your children.
Do not overfill the detergent compartment; otherwise it may cause scratches on your glasses as well as lead to
a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact the detergent manufacturers
directly.
Filling the detergent compartmentv
Push the latch to open the detergent container as shown in the image.
1
The Detergent pod has level lines
inside. The Detergent pod can take a total of 40 cm
3
of detergent. Open the dishwasher detergent and pour into
the larger compartment
b
25 cm
3
if dishes are heavily soiled or less 15 cm
3
.
2
If dishes have been kept dirty for a
very long time with, dried food waste on them or the dishwasher has been overloaded pour
a
5cm
3
of detergent
into the prewash compartment and start the machine. You may have to add more detergent into your machine,
depending on the degree of soil and on the water hardness level in your area.
Water hardness level
German hardness dH
French hardness dH
British hardness dH
Water hardness indicator
1
0-5
0-9
0-6
L1 is seen on display.
2
6-11
10-20
7-14
L2 is seen on display.
3
12-17
21-30
15-21
L3 is seen on display.
4
18-22
31-40
22-28
L4 is seen on display.
5
23-31
41-55
29-39
L5 is seen on display.
6
32-50
56-90
40-63
L6 is seen on display.
If the hardness of the water you use is above 90 dF (French hardness) or if you are using
well water; you are recommended to use filter and water refinement devices.
NOTE:
Hardness level is adjusted to level 3(L3) as a factory setting.Adjust
the water softener according to how hard your tap water is. .
2
1
DETER
GENT
1
2
CHAPTER -4: PREPARING THE MACHINE FOR USE
