EN - 16
7. THE CONTROL PANEL
2
1
3
4 5
6
7
Press the On/Off touch button (
1
) for 1
second to switch the machine on. Two
dashes will appear on the Programme
Display.
Select the programme most suitable for
your dishes using the programme touch
button (
2
). The selected programme will
appear on the Programme Display (
3
), from
P1 to P6. The selected programme will be
displayed for 3 seconds then its duration
will show for 1 second, alternately.
Additional functions can also be selected.
NOTE:
Each time the machine is
switched off and on, the Eco program will
be set as default. Options chosen before
will be cancelled.
NOTE:
When washing small loads,
press the Half Load button (
6
) to select the
area of the dishwasher that contains the
dishes to be washed. You can select both
baskets, the upper basket only, or the lower
basket only. Press the button until the light
which corresponds to the basket containing
your dishes illuminates.
NOTE:
Press the Tablet Detergent
button (
7
) when a combined detergent is
used that includes salt and rinse aid.
NOTE:
If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. To cancel this feature
on the newly selected wash programme,
press the feature button until the light on
the button switches off.
NOTE:
For dishwashers with an
InfoLED function, the InfoLED light will
illuminate when in operation. When the
programme is complete, the InfoLED will
switch off.
NOTE:
When there is insufficient
softening salt, the Salt Level Warning
Indicator (
8
) will illuminate to indicate that
the salt chamber needs filling.
NOTE:
When there is insufficient rinse
aid, the Rinse Aid Level Warning Indicator
(
8
)
will illuminate to indicate that the rinse
aid chamber needs filling.
Delaying the Programme
Press the Delay Start touch button (
4
)
to delay the start time of a programme
for 1 hour up to 19 hours. Pressing once
will delay the start time for 1 hour, and
continuing to press the button will increase
the delay duration. The programme can be
selected first and the delay duration after,
or vice versa. To cancel the delayed start,
either change the delay timer to ''0h'' or hold
the Programme touch button for 3 seconds.
The display will count down how many
seconds to hold the button for in order to
cancel the delay, “3-2-1".
NOTE:
Press and hold the Delay touch
button to change the delayed start time
more quickly. The rate of change in time
is proportionate to how long the button is
pressed and held. When the Delay Start
touch button is pressed for a long period of
time, the counter will stop at “h:00”.
7.1.
Changing a Programme
Follow the steps below to change a
programme while in operation.
1.
Open the door and press the
Programme touch button (
2
) to select a
new programme. If the door is opened
during operation, the time remaining of
the selected programme will show on
the display (
3
).
2.
After closing the door, the newly
selected programme will resume the
course of the old programme.
NOTE:
Open the door slightly at first
to stop a wash programme before it is
completed in order to avoid water spillage.
7.2.
Cancelling a Programme
Follow the steps below to cancel an active
