Sharp QT-CD250, Operation Manual, Page: 8 / 16

<P=003>
(Continued)
PLAY / PAUSE
TUNING STOP
TUNING REPEAT
BAND
CUE
PRESET REVIEW
PRESET
TUNING
/
PRESET
/
PRESET
TUNING
BAND
■
APSS (Auto Program Search System)
APSS automatically locates the beginning of any
track.
To listen again to the track being played:
Press the DOWN (
3 / 5
) button for less than 0.5
seconds during playback.
To move to the beginning of the next track:
Press the UP (
2 / 4
) button for less than 0.5
seconds during playback.
Notes:
●
To skip a number of tracks at one time, press the
UP (
2 / 4
) or DOWN (
3 / 5
) button
repeatedly until the desired track number is
shown.
●
To start playing at a desired track, press the UP
(
2 / 4
) or DOWN (
3 / 5
) button while in
the stop mode to select the track number, and
then press the PLAY/PAUSE (
0 6
) button.
■
Repeat play
During playback, press the REPEAT/BAND (
R
) but-
ton repeatedly to select the play mode.
Each time the button is pressed, the display will
change as follows:
Flash 1 track repeat play
Appear
All track repeat play
Disappear
Normal play
Repeat play indicator
Note:
●
When using repeat play, be sure to press the
STOP (
■
) button after you are through listening.
Otherwise, the CD(s) will play continuously.
■
Cue and review
1
Load a disc and begin playback.
2
Hold down the CUE (
2 / 4
) button for audible
fast forward, and hold down the REVIEW (
3 /
5
) button for audible fast reverse.
3
Normal playback will resume when the REVIEW
(
3 / 5
) or CUE (
2 / 4
) button is released.
Notes:
●
When the end of the disc is reached while
cueing, "End" will appear in the display and CD
operation is paused. Press the REVIEW (
3 /
5
) button for fast reverse or press the STOP
(
■
) button to stop CD operation.
●
If the beginning of the disc is reached while
reviewing, the mode will automatically switch to
normal playback at that point.
QT-CD250(SEC) TINSE0040SJZZ
7