QT-80W
– 3 –
NAMES OF PARTS
HOW TO SET THE POINT "0" ON TUNER DIAL MEMORY
Figure 3
1. Remove the front cabinet and main PWB. (Refer to page 4,
of disassembly section.)
2. Turn the gear dial in the arrowed direction until it stops so
that the " " mark comes to the front of main PWB.
3. When the tuning knob is set at 2, adjust it from above so that
its "0" point rib comes to the right of "0" point rib of the dial
drum when you face the unit.
4. Check the tuning display label by turning the tuning knob.
The frequency band will be FM 88 - 108 MHz when the dial
is turned counter-clockwise.
5. Reassemble the front cabinet.
0
1. Function/Beat Cancel Switch
0
2. Cassette Compartment
0
3. Record Button
0
4. Play Button
0
5. Rewind Button
0
6. Fast Forward Button
0
7. Stop/Eject Button
0
8. Pause Button
0
9. Volume Control
10. Band Selector
11. Built-in Microphone
12. Extra Bass Button
13. Fine Tuning Control
14. Tuning Control
15. Mixing Microphone Socket
16. Line Input Sockets
17. AC Voltage Selector
18. AC Input Socket
19. Battery Compartment
20. Headphone Socket
1
2
3 4 5 6
7 8 9 10
11 12 13 14
15
16
19
20
17 18
Tuning Knob
Tuning Knob
“0” Point of Tuning Display
Tuning Knob “0” Point Rib
Tuning Knob “ 0 ” Point Rib
Top Side
Main PWB
Dial Drum
Gear Dial
Main PWB Front Side
Mark “ ”
Dial Drum “0” Point Rib
Dial Drum
Tuning Knob
Bracket
Dial Drum “0”
Point Rib
Front Side
2
3
Mark “ ”
