Sharp PN-Y325 Operation Manual Download Page 12

Page: 12 / 49

11 3

Connecting Peripheral Equipment

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a PC screen is

displayed for the first time using D-SUB, or when the setting

of the PC is changed. The screen is adjusted automatically

when AUTO in the SCREEN menu is set to ON.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• The audio input terminals used in each input mode are

factory-set as follows.

Input mode

Audio input terminal

DVI-D

Audio1 input terminal

HDMI[PC], HDMI[AV]

HDMI input terminal /

Audio1 input terminal

D-SUB[RGB]

Audio1 input terminal

D-SUB[COMPONENT],

D-SUB[VIDEO]

Audio2 input terminals

USB

USB port

1. HDMI input terminal

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• Set HDMI of INPUT SELECT on the SETUP menu

according to the device to be connected.

2. DVI-D input terminal

• Use a commercially available signal cable (DVI-D 24 pin).

3. D-sub input terminal

• Set D-SUB of INPUT SELECT on the SETUP menu

according to the device to be connected.

4. USB port

• Connect a USB flash drive to the USB port.

• Do not connect a USB device other than a USB flash

drive.

• Turn off the power of the monitor when removing a USB

flash drive.

• After you have connected a USB flash drive, create “data.

db” and “db.info” in the root folder.

Supported USB flash drives

File System

FAT32

Capacity

Up to 32 GB

(maximum file size 2 GB)

• Do not use a USB flash drive with a security function or

a write protection function.

• Use a USB flash drive with a shape that can be inserted

in the USB port. Some USB flash drives with special

shapes cannot be inserted. Do not forcibly insert a USB

flash drive. This may damage the connector and cause

failure.

Summary of Contents for PN-Y325


















































Search results

Summary of Contents for PN-Y325

Reviews:

Related manuals for PN-Y325

Brands by name

Popular brands

Sharp PN-Y325, Operation Manual

Search results

Summary of Contents for PN-Y325

Reviews:

Related manuals for PN-Y325

Brands by name

Popular brands