Installation
6
Mounting PN-TPCi7W7 on Sharp PN-L Series
Displays
1.
Before beginning
Make sure to turn off the monitor and remove the AC power.
2.
Items needed
•
Sharp PN-L Series Touch-Screen Display
•
PN-TPCi7W7
•
Mounting Plate
•
AC Power Adapter
•
4 x M4 (0.7x10mm) screws
•
2 x M3 (0.5x5 mm)
•
Phillips
®
Screw Driver
3.
Attach the mounting plate
There are 8 holes on the mounting
plate, but only use 4 holes to
match the monitor’s mounting
holes depending on the monitor
model.
The mounting plate is attached to
the Sharp “PN-L” series display as
in Figure 2.
Secure the mounting plate to the
monitor with four included M4 screws.
*NOTE- Do not use the holes marked with the red x
Figure 1
Figure 2
