Sharp PN-R903A, Operation Manual

Page: 56 / 62

56
E
Specifications
n
Product Specifications
Model PN-R903A
LCD component 90" Class [90-1/16 inch (228.7cm) diagonal] TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors Approx. 1.06 billion colors
Pixel pitch 1.038 mm (H) × 1.038 mm (V)
Max. brightness (typical) 700 cd/m 2 * 1
Contrast ratio (typical) 4000: 1
Viewing angle 176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 78-7/16 x 44 -1/8 (1993.0 x 1121.0)
Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75
Ω
],
DisplayPort 1.1
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green*
2
,
Composite sync (TTL: positive/negative)*
2
Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC/AV HDMI x 2
Mini D-sub 15 pin, 3 rows x 1
PC DisplayPort x 1
DVI-I 29 pin (HDCP compatible) x 1
Audio 3.5 mm mini stereo jack x 2
Serial (RS-232C) D-sub 9 pin x 1
Output terminals PC DisplayPort x 1
DVI-D 24 pin (HDCP compatible) x 1
Audio 3.5 mm mini stereo jack x 1
Serial (RS-232C) D-sub 9 pin x 1
LAN terminal 10 BASE-T/100 BASE-TX
Speaker output 10 W + 10 W
Power requirement AC 100 V - 240 V, 7.5 A, 50/60 Hz
Operating temperature * 3 32°F to 104°F (0°C to 40°C)
Operating humidity 20% to 80% (no condensation)
Power consumption
(Maximum / input signal waiting mode * 4 / standby
mode * 5 )
660 W / 1.4 W / 1.4 W
Dimensions (excluding protrusions) inch (mm) Approx. 80-7/8 (W) x 4-13/16 (D) x 47-1/8 (H) (2055 x 122 x 1197)
Weight lbs. (kg) Approx. 165.3 (75) (excluding the temporary stand used in the package
for transportation)
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness.
*2 D-Sub input terminal only.
*3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*4 When AUTO INPUT CHANGE is set to OFF.
*5 When POWER SAVE MODE is set to OFF. When POWER SAVE MODE is set to ON: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.