manualshive.com logo in svg

Sharp PN-HW431, Operation Manual

Share
Download
Sharp PN-HW431 Operation Manual Download Page 41

41

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. (PN-HW861/PN-HW751: 

at least 3 people.)

•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.

•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials 

such as plaster / thin plastic board / wood before starting installation.

•  This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. 

Install by the most suitable method for the material and the structure.

•  To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the 

thickness of the mounting bracket.

Screws (M6)
Mounting bracket
Monitor mounting

5/16 - 3/8 inch (8-10 mm)

•  Do not use an impact driver.
•  When moving the monitor, be sure to hold it with the handles [PN-HW861/PN-HW751] or hold the parts marked by 

 

below [PN-HW651/PN-HW551/PN-HW501/PN-HW431]. Do not grasp the screen. This may cause product damage, failure, 
or injury. 

[PN-HW651/PN-HW551/PN-HW501]

[PN-HW431] 

•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.

•  Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation.

Mounting Precautions  

(For SHARP dealers and service engineers)

Summary of Contents for PN-HW431











































Reviews:

No comments

Brands by name

Popular brands

Load more brands