Sharp Plasmacluster IG-CH2J, Operation Manual

Page: 8 / 20

E-6
INSTALLATION GUIDE
HOW TO SET UP HELMET ON PCI UNIT
Connection of AC adapter and installation of main unit
Insert the DC plug of AC
adapter in the DC jack of
the main unit.
1
2
Insert the AC plug of AC
adapter in the outlet.
3
Place the main unit at the level place in the room.
• .e sure to place the product on a stable surface.
• Do not block the suction port and the air outlet.
• If the Plasmacluster Ion Generator causes interference to radio or television
reception, try to correct the interference by one or more of the following measures:
• Adjust or relocate the receiving antenna.
• Increase the distance between the product and radio�TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio�TV technician for help.
Precautions on installation
• Be sure to turn up the shield to have circulation of air.
• Wipe helmet of any water droplets if any.
DC plug
AC plug
AC adapter
DC jack
< Full-face type> <Open-face type> <Half type>
IG-CH2J.EN_A515.indd 8 11.11.11 5:14:00 PM