background image

E-12

CARE AND MAINTENANCE

FILTER REPLACEMENT GUIDELINES

The replacement period differs depending on the room environment, the usage hours 

and location of the Air Purifier.

If dust or odour persist, replace the filters.

(Refer to “Please read before operating your new Air Purifier”)

HEPA Filter / Washable Active Carbon Filter

Guide for filter replacement timing

• Filter life can be greatly reduced in a poor environment.

  The presence of cigarette smoke, pet dander and other concentrations of airborne particles  

   will cause filters to become clogged in less time. Please check filters regularly and replace  

   as needed.

Up to 5 years after opening

Replacement Filters

 

  Model           • HEPA Filter : 1 unit

FZ-W53SFJ    • Washable Active Carbon Filter : 1 unit

REPLACING THE FILTERS

1. See page E-6,7 for directions on how to install the filters when replacing.

2. Fill in the usage start date of the filters on the Date Label

.

Disposal of Filters

Please dispose of replaced filters according to the local disposal laws and regulations.

HEPA Filter Materials:

• Filter: Polypropylene  • Frame: Polyester

Active Carbon Filter Materials:

• Deodoriser: Activated charcoal  • Net: Polypropylene 60%, Polyester 40%

FU-W53J.eng.indd   14

09.10.9   9:19:43 AM

Summary of Contents for Plasmacluster FU-W53J





















Reviews: