E-6
When using electrical appliances, basic safety precautions should be followed, including the
following:
WARNING
- To reduce the risk of electrical shock, fire or injury to persons:
• Read all instructions before using the unit.
• Use only a 120 volt outlet.
• The air purifier has a polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit into the outlet, reverse it. If it still does not fit,
contact a qualified electrician or service person. Do not alter the plug in any way.
• Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet
is loosened.
•
Periodically remove dust from the power plug.
• Do not insert fingers or foreign objects into the air intake or air outlet.
• When removing the power plug, always hold the plug and never pull the cord.
Electrical shock and/or fire from short circuit may occur as a result.
• Do not remove the plug when your hands are wet.
• Do not use this unit near gas appliances or fireplaces.
• Remove the power plug from the wall outlet before cleaning the unit and when not using the
unit.
Electrical shock from bad insulation and/or fire from short circuit may occur as a result.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent,
Sharp Authorized Service Center or similarly qualified person in order to avoid a hazard.
•
Do not operate when using aerosol insecticides or in rooms where there is oily residue, incense,
sparks from lit cigarettes, chemical fumes in the air or in very high humidity conditions, such as a
bathroom.
•
Be cautious when cleaning the unit. Corrosive cleansers may damage the exterior.
•
Only Sharp Approved Service Center should service this air purifier. Contact the nearest Service
Center for any problems, adjustments, or repairs.
NOTE
- Radio or TV Interference
If this air purifier should cause interference to radio or television reception, try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This product fulfils the requirement of the International standard CISPR 11.
In conformity with this standard, this product is classified as group 1 class B equipment.
Group 1 means that the equipment in which there is intentionally generated or used conductively
coupled RF energy that is necessary for the internal functioning of the equipment itself.
Class B equipment means that the equipment suitable to be used in domestic establishments.
IMPORTANT SAFETY INSTRUCTIONS
Operation_FP-FR+ES.indb 6
5/23/11 10:49:59 AM
