Sharp PGF325W - WXGA DLP Projector Setup Manual Download Page 31

Page: 31 / 34

-31

Resetting the Lamp Timer of the Projector via LAN

Click “Properties” on the “File”
menu.

Click the “Settings” tab, and
then click “ASCII Setup”.

Select the check boxes next to
“Send line ends with line feeds”,
“Echo typed characters locally”,
and “Append line feeds to in-
coming line ends”, and click
“OK”.

•

The LAMPRESET Properties window
appears, click “OK”.

If a user name and/or password
is set for the projector, enter the
user name and password.

Send the lamp reset command
“LPRE0001”.

•

This command can only be sent when
the projector is in standby mode.

•

When “OK” is received, this indicates
that the lamp was successfully reset.

Close HyperTerminal.

Summary of Contents for PGF325W - WXGA DLP Projector



































Search results

Summary of Contents for PGF325W - WXGA DLP Projector

Reviews:

Related manuals for PGF325W - WXGA DLP Projector

Brands by name

Popular brands

Sharp PGF325W - WXGA DLP Projector, Setup Manual

Search results

Summary of Contents for PGF325W - WXGA DLP Projector

Reviews:

Related manuals for PGF325W - WXGA DLP Projector

Brands by name

Popular brands