45
Useful
Features
SEL./ADJ.
ENTER
END
Auto Power Off
System Sound
System Lock
h
On
On
Auto Restart
On
STANDBY Mode
Standard
0
min
0
Lamp Timer(Life)
100%
Speaker
On
Audio Input
Audio 1
RS-232C
9600bps
Fan Mode
Normal
Disable
Auto Sync
On
Picture
SCR - ADJ
PRJ - ADJ
Help
1
2
3
4
5
6
7
8
9
0
Menu operation
n
Page
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Selectable
items
On
Off
Description
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
Note
2
2
2
2
2
Auto Power Off Function
6
6
6
6
6
Speaker Setting
5
5
5
5
5
Setting the Confirmation
Sound (System Sound)
Selectable
items
On
Off
Description
A confirmation sound is made when
the projector turns on/off.
No confirmation sound is made.
When set to “Eco”, power consumption is
reduced in standby mode.
4
4
4
4
4
STANDBY Mode
Selectable
items
On
Off
Description
The audio signal is output from the
internal speaker.
The audio signal is not output from the
internal speaker.
Selectable
items
Eco
Standard
Description
The monitor output and RS-232C
functions are switched off in standby
mode.
The monitor output and RS-232C
functions are activated even if the
projector is in standby mode.
• Auto Sync adjustment is also performed by
pressing
AUTO SYNC
on the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page
Selectable
items
On
Off
Description
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not
automatically performed.
Note
1
1
1
1
1
Auto Sync (Auto Sync
Adjustment)
3
3
3
3
3
Auto Restart Function
Selectable
items
On
Off
Description
If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
Adjusting the Projector Function (“PRJ - ADJ” Menu)
Summary of Contents for PGF310X - Notevision XGA DLP Projector
Page 76: ......
