E-9
Important
Information
c. Moving the mouse cursor
Press
∂
/
ƒ
/
ß
/
©
on the remote control to move
the mouse cursor on the screen.
• The amount of pressure applied to the
∂
/
ƒ
/
ß
/
©
buttons
determines the speed the mouse cursor travels. If you
lightly press the periphery of the
∂
/
ƒ
/
ß
/
©
buttons, the
mouse cursor moves slowly. If you press hard, the mouse
cursor moves quickly.
• The mouse sensitivity can also be adjusted from your
computer’s operating system.
d. Selecting the mouse button for two-
button mouse systems
Use
LEFT-CLICK
on the back of the remote
control to correspond to the left mouse button
on two-button mouse systems, and
RIGHT-
CLICK
on the front of the remote control to cor-
respond to the right button.
• For one-button systems, use either the
LEFT-CLICK
or
RIGHT-CLICK
button.
Using the laser pointer
The laser pointer on the remote control emits a laser
beam from the laser light window. This is a Class
II
laser which may impair your sight if directed into the
eyes. The three marks shown on the left are caution
labels for the laser beam.
• Do not look into the laser light window or shine the laser
beam on yourself or others. (The laser beam used in this
product is harmless when directed onto the skin. How-
ever, be careful not to project the beam directly into the
eyes.)
• Always use the laser pointer at temperatures between
41°F and 104°F (
`
5°C and
`
40°C).
• Use of controls or adjustments, or performance of proce-
dures other than those specified herein may result in haz-
ardous radiation exposure.
Press
LASER POINTER
(
) to activate the laser pointer.
When the button is pressed, the light stays on. When the
button is released, the light automatically goes off.
• For safety reasons, the laser pointer automatically goes
off after 1 minute of continuous use. To turn it on again,
press
LASER POINTER
(
) one more time.
Using the remote control in a dark room
When the position of the
MOUSE/ADJUSTMENT
switch is changed, the functions of certain buttons on
the remote control also change. You can determine
the function of a button by the color of its backlight
display. See the table on the left.
Press
BACKLIGHT
to turn on the backlights of the opera-
tion buttons for about five seconds.
• If the
MAIN POWER
switch on the remote control is left
on for more than 10 minutes without operation, the power
will automatically turn off. To turn the power back on,
press any button on the remote control for more than one
second.
Operating the Wireless Mouse Remote Control
Mouse cursor
Position of MOUSE/ADJUSTMENT switch
ON (RED)
MOUSE
LASER POINTER (GREEN)
RIGHT-CLICK (GREEN)
MOUSE (NOT LIT)
ON (NOT LIT)
ADJ.
MENU (RED)
ENTER (RED)
ADJUSTMENT (NOT LIT)
—
Button name
LASER POINTER/MENU
RIGHT-CLICK/ENTER
MOUSE/ADJUSTMENT
LEFT-CLICK
BLACK SCREEN
POWER ON/OFF
VOLUME
MUTE
COMPUTER
VIDEO
INPUT CHECK
AUTO
SYNCHRONIZATION
Laser light window
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM
WAVE LENGTH : 670nm
MAX. OUTPUT : 1mW
CLASS
II
LASER PRODUCT
"COMPLIES WITH 21 CFR SUBCHAPTER J"
SHARP ELECTRONICS CORPORATION
SHARP PLAZA, MAHWAH, NEW JERSEY 07430
TEL : 1-800-BE-SHARP
U.S.A. ONLY
REMOTE CONTROL
MODEL NO. : G1462CESA
DC6V (1.5VX4PCS.)
MADE IN JAPAN
FABRIQUÉ AU JAPON
AVOID EXPOSURE
-
LASER
RADIATION IS EMITTED
FROM THIS APERTURE.
Summary of Contents for PG-D120U - Pro - LCD Projector
Page 39: ...Appendix E 38 Notes ...
