Sharp PG-C20XE - Notevision SXGA LCD Projector, Operation Manual

Page: 39 / 55

Useful Features
36
Reverse/Invert Image Function
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Projector Remote control
(GUI) On-screen Display
Selected item
Front
Ceiling
Ⳮ
Front
Rear
Ceiling
Ⳮ
Rear
Projected image
Normal image
Inverted image
Reversed image
Reversed and inverted image
1
Press MENU .
2
Press
∂
/
ƒ
to select “PRJ Mode”, and then press
ENTER .
3
Press
∂
/
ƒ
to select the desired projection mode,
and then press ENTER .
4
To exit from the GUI, press MENU .
• This function is used for the reversed image and ceiling-
mount setups. See page 19 for these setups.
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
2
,
3
2
,
3
1
,
4
Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, since the projector cannot distinguish
640
⳯
480 signal resolution on computers or 480P on
DTVs, select an appropriate mode on “Special Modes.”
1
Press MENU .
2
Press
∂
/
ƒ
to select “Special Modes”, and then
press ENTER .
3
Press
∂
/
ƒ
to select the optimal resolution mode.
4
Press ENTER to save the setting.
5
To exit from the GUI, press MENU .
• When inputting DTV 480P signals, select “480P” in step
3
above.
Projector Remote control
(GUI) On-screen Display
Special Mode Adjustment
ON/OFF
POWER
LAMP
TEMP.
KEYSTONE
INPUT
BACK ENTER MENU
AUTO SYNC
2
,
3
2
,
4
1
,
5