5-4 Modem
5
Setting Modem Port
To use communication software,
1.
Turn on your notebook.
2.
Press the
F2
key when the message
Press <F2> to enter Setup
appears.
3.
On the
Advanced
page of the Setup Utility, set the
COM1/COM2
Function
to
FAX Modem/IR
or
Serial Port/FAX Modem
.
4.
If you assign the modem to COM1, set the
COM1
Port
to
3F8
,
IRQ4
. If you
assign the modem to COM2, set the
COM2 Port
to
2F8
,
IRQ3
.
5.
Press the
Esc
key and select
Save Changes & Exit
.
6.
In the communication software, set the items such as COM ports, baud rate, etc.
Refer to the software manual or online help or the
manual of Windows 95
.
Using communications software
Before starting to use communications software, set Power Management item in the
Power in the Control Panel to
Off
. Also, do not enter suspended mode while using
communications software.
If a power management function becomes active during communication,
correct data transfer may not be possible
.
You must set parameters such as modem speed (baud rate) and line type (pulse
dialing or tone dialing) within the communications software you are using. For
details, please refer to the documentation of the software.