Sharp NEC Display Solutions Europe
User Manual & Installation Guide
NEC Soundbar / NEC Collaboration Soundbar
ABi - Ver. 1.0 - 20201220
10
CONNECTIONS - SP-PSCM(IQ)
IMPORTANT DEVICE SETTINGS
Display:
1. Connect the soundbar audio signal in
: Connect the stereo mini Jack (3,5mm -
1/4") cable of the soundbar to the AUDIO IN of the Display.
2. Connect the soundbar speakers
:
Connect the audio cables to the speaker terminals on the side of the power amplifier.
Red terminal is plus(+) and black terminal is minus(-).
3. Activate the external speakers
: Push the button “Internal/External speaker switch”
below the speaker terminals on the monitor to enable the external speakers.
4. Connect the soundbar audio USB
: Connect the 2m USB cable (the one with the
white label) from the soundbar to one of the USB2.0 ports of the OPS slot-in PC
5. Connect the Huddly camera
: Connect the 2m USB cable from the soundbar to one
of the USB3.0 ports of the OPS slot-in PC.
6. Connect the soundbar power supply
: Connect the soundbar power supply to the
power socket.
7. Select Audio Input on the Display Menu:
In the Display Menu under the AUDIO
section, select AUDIO INPUT: IN
Connected Computing Device (OPS):
Playback device
“2 – Phnx MT103_16k”
Recording device
“2 – Phnx MT103_16k”
Recommendation: Disable all unneeded layback
devices in Windows (Sound Control Panel)
