background image

- 8 -

Ver. 6.0U _ Sep 6, 2012

Installation Manual for PV Modules

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

TINSEA120MNZZ

Additional Item(s) Excluded from Warranty Coverage

Warranty coverage does not apply when:

  a)  The product is installed or repaired or serviced  in a manner that is contrary to Sharp’s Installation Manual;
  b)  The product is installed in a mobile or marine environment, 
  c)  The product is subjected to improper voltage or power surges or abnormal environmental conditions (such as acid rain or other pollution);
  d)  The components in the construction base on which the module is mounted are defective; 
  e)  External corrosion, mold discoloration or the like occurs;
  f)  The product has been moved from its original installation;
  g)  The model number or serial number of the product is altered, removed or rendered illegible. 
Sharp’s aggregate liability in connection with the Product, if any, shall not exceed the purchase price paid to Sharp for the Product or service which 
gave rise to the claim under the Limited Warranty. 

The repair, replacement of the Product, or the supply of additional Product does not cause the beginning of new warranty terms, nor shall the original 
warranty terms of this Limited Warranty be extended. Any replaced product shall become Sharp’s property

Where to Obtain Service:

Warranty service is available at a Sharp Authorized Service Center Dealer located in the United States. To find 
the location of the nearest Sharp Authorized Service Center Dealer, call Sharp toll free at 1-800 SOLAR06 
(800-765-2706). 
Call toll free at 1-800-765-2706 to obtain a Return Authorization Number and shipping instructions. Proof of 
Purchase will be required. 

What to do to Obtain Service:

Ship prepaid your Product to a Sharp Authorized Service Center Dealer. Be sure to have Proof of Purchase 
available. If you ship the Product, be sure it is insured and packaged securely. Sharp will not be responsible for 
damage incurred during transport.

YOUR S

H

A

RP

 DISTRIBUTOR

SOLIGENT

800-967-6917

www.soligent.

net

Summary of Contents for ND-255QCS









Reviews: