Sharp MX-M6570, User Manual

Page: 904 / 935

8-108
SYSTEM SETTINGS ► SETTING MODE FOR FAX
d
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items Factory default setting U A Page
■
System Settings
●
Image Send Settings

Fax Settings
 Default Settings
• Resolution Setting No Yes
4-50 - Apply the Resolution Set when Stored Disabled No Yes
+ (No item) Standard No Yes
• Dial Mode Setting Tone No Yes
4-4
• Auto Wake Up Print Enabled No Yes
• Pause Time Setting 2 seconds No Yes 4-11
• Fax Dest. Confirmation Mode Disabled No Yes 4-26
- Apply to Addresses Other Than Fax – No Yes
4-10
• Speaker Settings No Yes
- Speaker Volume: 5 No Yes
- Ringer Volume Volume: 2 No Yes
- Line Monitor Volume: No Sound No Yes
- Fax Receive Complete Signal Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec. No Yes
- Fax Send Complete Signal Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting: 3 sec. No Yes
- Fax Communication Error Signal Volume: 2; Tone Pattern: 3
Transmission Complete
Sound Time Setting:
Every 0.3 seconds No Yes
• Remote Reception Number Setting 5 No Yes 4-122
• Original Print on Transaction Report Print Out Error Report Only No Yes 8-65