manualshive.com logo in svg

Sharp MX-M623, Operation Manual, Page: 123 / 877

Share
Download
Sharp MX-M623 Operation Manual Download Page 123

1-82

BEFORE USING THE MACHINE

Contents

For the steps that follow, see the appropriate page below for the software that you are installing.

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section depending on whether 
the machine is connected to a network or connected by USB cable.

☞

WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE

 (page 1-91)

WHEN THE MACHINE IS CONNECTED TO A NETWORK

This section explains how to install the printer driver and the PC-Fax driver when the machine is connected to a 
Windows network (TCP/IP network).

Supported operating systems: Windows 2000

*

/XP

*

/Server 2003

*

/Vista

*

/Server 2008/7

*

* Administrator's rights are required to install the software.

6

* The above screen appears when using the "Disc 1" 

CD-ROM.

The software selection screen appears.

The software selection screen appears.
Before installing the software, be sure to click the [Display 
Readme] button and view the detailed information on the 
software.

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER

•

WHEN THE MACHINE IS CONNECTED TO A NETWORK

*

-

Standard installation

: page 1-83

-

Installation by specifying the machine's address

: page 1-85

-

Printing using the IPP function and the SSL function

: page 1-88

•

WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE

: page 1-91

•

USING THE MACHINE AS A SHARED PRINTER

: page 1-96

INSTALLING THE PRINTER STATUS MONITOR

: page 1-101

INSTALLING THE SCANNER DRIVER

: page 1-102

*

If the machine is being used on an IPv6 network, see "

Installation by specifying the machine's address

" (page 1-85).

• The PS3 expansion kit is required to use the PS printer driver or the PPD driver.

• To print to the machine over the Internet using the IPP function when the machine is installed in a remote location, or to 

print using the SSL (encrypted communication) function, see "

Printing using the IPP function and the SSL function

" (page 

1-88) and install the printer driver or the PC-Fax driver.

•

If the machine is connected to an IPv6-only network

The software cannot be installed by detecting the machine's address from the installer. After installing the software as 
explained in "

Installation by specifying the machine's address

" (page 1-85), change the port as explained in "

Changing to a 

Standard TCP/IP Port

" (page 1-107).

• The installation procedure in this section is for both the printer driver and the PC-Fax driver, although the explanations are 

centered on the printer driver.

Summary of Contents for MX-M623














































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments