Sharp MX-M266N, Operation Manual

Page: 771 / 794

8-24
TROUBLESHOOTING
Contents
PROBLEMS RELATED TO ONE-TOUCH INDIVIDUAL
KEYS / GROUP KEYS
Problem Point to check Solution
A one-touch individual
key or
g roup key
cannot be stored.
Has the maximum number of keys been
stored? Delete one-touch keys and g roup keys that are not
bein g used.
Have functions been disabled by the
administrator? Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
A one-touch individual
key or
g roup key
cannot be edited or
deleted.
If the key is an individual key, is the key
included in a group? Remove the key from the g roup and then edit or
delete the key.
(If the key is included in multiple groups, it must be
removed from all groups.)
Þ
System Settings > "Address Control" > "Address Book"
If multiple group keys have been stored, print the Group
List in "Sending Address List" in the system settings.
The list will show where the key is stored.
Þ
System Settings > "List Print (User)" > "Sending
Address List" > "Group List"
Is the key being used in a reserved
transmission or a transmission in
progress? Wait until the transmission is finished or cancel the
transmission and then edit or delete the key.
Is the key included in a program key? Remove the key from the pro g ram and then edit or
delete the key.
(If the key is included in multiple programs, it must be
removed from all programs.)
Þ
System Settings > "Address Control" > "Program"
If multiple program keys have been stored, print the
Program List in "Sending Address List" in the system
settings. The list will show where individual and group
keys are stored.
Þ
System Settings > "List Print (User)" > "Sending
Address List" > "Program List"
Is the key that you wish to edit or delete
stored as a relay destination of an
F-code relay broadcast transmission? Remove the key from the relay destinations of the
F-code relay broadcast transmission and then edit
or delete the key.
An individual or group one-touch key that is stored as a
relay destination cannot be edited or deleted.
Þ
System Settings > "Address Control" > "F-Code
Memory Box"
Have functions been disabled by the
administrator? Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
Has your administrator enabled a
function that prevents editing/deleting? Check with your administrator.
If your administrator has enabled settings such as
"Inbound Routing Settings" (in the Web pages),
editing/deleting will not be possible.