Sharp MX-M266N, Operation Manual

Page: 646 / 794

7-16
SYSTEM SETTINGS
Contents
Address Control
Address Control is used to store, edit, and delete one-touch keys, group keys, program keys, and custom indexes.
Touch the [Address Control] key to configure the settings.
Address Book
Destinations can be stored in the address book for easy retrieval.
When the [Address Book] key is touched, the following screen appears.
• [Add New] key
Use this to add a new address.
• List display
This displays a list of the currently stored addresses.
An address can be selected to open an edit/delete
screen for the address.
Storin g addresses
Touch the [Add New] key in the above screen to store an address. Up to 1000 addresses can be programmed.
For more information, see "
Settings " (page 7-17).
Editin g and deletin g addresses
An address can be selected from the list in the above screen to open an edit/delete screen for the address.
For more information, see "
Settings " (page 7-17).
Delete an address with the [Delete] key.
• The settings that can be selected vary depending on the peripheral devices installed.
• For explanations of settings related to the fax function, see " SYSTEM SETTINGS FOR FAX " (page 7-102).
Address Book Back
Index Switch
Sort Address
Sorting Order
ABC
Search Number
All
Add New
AAA AAA
CCC CCC
EEE EEE
GGG GGG
III III
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
Fre q . ABCD EFG H IJKL MNOP QRSTU V WXYZ etc.
1
2
When " Disable Registering Destination from Operation Panel " (page 7-80) is enabled in the system settings (administrator)
for a function, addresses cannot be stored for that function.
• If you cannot edit or delete a one-touch individual or g roup key...
Individual keys and group keys cannot be edited or deleted in the following situations:
- The key is used in a reserved transmission or a transmission in progress.
- The key is included in a group key.
- The key is included in a program.
- The key is specified as a forwarding destination in the " Default Address Setting " (page 7-84) or "Inbound Routing
Settings" / "Document Administration Function" (in the Web pages).
- When " Disable Registering Destination from Operation Panel " (page 7-80) is enabled.
If the key is used in a reserved transmission or a transmission that is in progress, cancel the transmission or wait until it is
completed and then edit or delete the key.
If the key is included in a group, first delete the key from the group and then edit or delete the key.
If the key is specified as a forwarding destination, cancel the forwarding destination setting and then edit or delete the key. If
"Disable Registering Destination from Operation Panel" has been enabled, clear this function and then edit or delete the key.