manualshive.com logo in svg

Sharp MX-C400P, Operation Manual

Share
Download
Sharp MX-C400P Operation Manual Download Page 76

1-73

BEFORE USING THE MACHINE

CLEANING THE PT CHARGER

If black or colored lines still remain after the main charger have been cleaned, use the PT charger cleaner to clean the 
PT charger.

1

Press the [POWER] key (

) on the 

operation panel to turn off the panel 
power, and then switch the main power 
switch to the off position.

2

Open the front cover and remove the 
toner collection container.

☞

REPLACING THE TONER COLLECTION 
CONTAINER

 (page 1-52)

Do not point the holes down as used toner will spill out.

3

Clean the PT charger.

(1) Slowly pull the PT charger cleaner out until 

you feel a slight resistance.

(2) Slowly push the PT charger cleaner back in.

(3) Repeat the above (1) to (2) three times.

4

Install the toner collection container.

☞

REPLACING THE TONER COLLECTION 
CONTAINER

 (page 1-52)

(1)

(2)

Summary of Contents for MX-C400P


































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands