manualshive.com logo in svg

Sharp MX-C311, Operation Manual, Page: 769 / 849

Share
Download
Sharp MX-C311 Operation Manual Download Page 769

7-68

SYSTEM SETTINGS

Contents

Network Settings

Network settings are described below. Touch the [Network Settings] key to configure the settings.

IPv4 Settings

When using the machine on a TCP/IP (IPv4) network, use 
this setting to configure the IP address of the machine.
The settings are shown below.

IP Address

Enter the IP address of the machine.

IP Subnet Mask

Enter the IP Subnet Mask.

IP Gateway

Enter the IP Gateway address.

DHCP

Use this setting to have the IP address obtained 
automatically using DHCP (Dynamic Host Configuration 
Protocol). When this setting is enabled, it is not 
necessary to manually enter an IP address.

IPv6 Settings

When using the machine on a TCP/IP (IPv6) network, use 
this setting to configure the IP address of the machine.
The settings are shown below.

Enable IPv6 Protocol

Enable this setting.

DHCPv6

Use this setting to have the IP address obtained 
automatically using DHCP (Dynamic Host Configuration 
Protocol). When this setting is enabled, it is not 
necessary to manually enter an IP address.

Manual Address

Enter the IP address of the machine.

Prefix Length

Enter the prefix length (0 to 128).

Default Gateway

Enter the IP Gateway address.

Enable TCP/IP

To use the machine on a TCP/IP network, this setting 
must be enabled.

Enable NetWare

To use the machine on a NetWare network, this setting 
must be enabled.

Enable EtherTalk

To use the machine on an EtherTalk network, this 
setting must be enabled.

Enable NetBEUI

To use the machine on a NetBEUI network, this setting 
must be enabled.

Reset the NIC

This returns all "Network Settings" to the factory default 
settings.

Ping Command

Use this function to check if the machine can 
communicate with a computer on the network.
Specify the IP address of the desired computer and 
touch the [Execute] key. A message will appear 
indicating whether or not the computer responded.

When settings are changed, the changes will take effect after the machine is restarted. To restart the machine see 
"

TURNING THE POWER ON AND OFF

" (page 1-14) in "1. BEFORE USING THE MACHINE ".

• If the machine will be used on a TCP/IP network, be 

sure to enable "

Enable TCP/IP

" below.

• If DHCP is used, the IP address assigned to the 

machine may change automatically. If the IP 
address changes, specify the printer port setting 
again and then print.

• If the machine will be used on a TCP/IP network, be 

sure to enable "

Enable TCP/IP

" below.

• If DHCP is used, the IP address assigned to the 

machine may change automatically. If the IP 
address changes, specify the printer port setting 
again and then print.

• In an IPv6 environment, the machine can use LPD 

or IPP protocol.

Summary of Contents for MX-C311


















































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments