Sharp MX-B427PW User Manual Download Page 77

Page: 77 / 131

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

When shipping the printer, use the original packaging or contact the place where you purchased the printer.

Maintain the printer

Summary of Contents for MX-B427PW




































































































































Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands

Sharp MX-B427PW, User Manual

Search results

Summary of Contents for MX-B427PW

Reviews:

Related manuals for MX-B427PW

Brands by name

Popular brands