manualshive.com logo in svg

Sharp MX-B400P, Operation Manual

The Sharp MX-B400P Safety Manual is a crucial resource that provides essential guidelines for safe and efficient usage of this exceptional product. Available for free download at manualshive.com, this comprehensive manual ensures that users have all the necessary information to operate the MX-B400P reliably and securely.

Share
Download
background image

3-24

SYSTEM SETTINGS

OPERATION PANEL (ADMINISTRATOR)

Operation Settings

Settings related to machine operation can be configured. Select the [Operation Settings] key to configure the settings.

Other Settings

Keys Touch Sound

This setting is used to adjust (or turn off) the volume of 
the beep that sounds when you select a key.

Display Language Setting

The language that appears in the display can be 
changed.

Machine Display Pattern Setting

One of the six color patterns can be selected for the color pattern in the display.
A sample of the selected pattern can be viewed.

Device Control

These settings control devices installed on the machine. Select the [Device Control] key to configure the settings.

Other Settings

Optimization of a Hard Disk

This function optimizes the hard drive of the machine by 
defragmenting data. If a job is in progress, a message 
will appear and optimization will not begin until the job is 
finished. During optimization, the following operations 
are not possible:

• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of 

the machine.

• Auto Power Shut-Off

When optimization is completed, the machine will 
automatically restart.

When user authentication is enabled and a display 
language is specified in the favorite operation group, 
that setting is given priority.

When the print hold (retention) function is frequently 
used and output of files seems somewhat slow, 
optimizing the hard drive may improve performance.

Summary of Contents for MX-B400P


























































































































































































































































Reviews:

No comments

Related manuals for MX-B400P

Xerox All in One Printer Product Safety Data Sheet preview
All in One Printer
Brand: Xerox Pages: 3
Canon iR3245 Troubleshooting Manual preview
iR3245
Brand: Canon Pages: 300
Canon iR3245 Network Manual preview
iR3245
Brand: Canon Pages: 288
MAKER MADE 300X Setting Up preview
300X
Brand: MAKER MADE Pages: 21
Canon iR3245 User Manual preview
iR3245
Brand: Canon Pages: 58
Canon iR1510 Quick Start Manual preview
iR1510
Brand: Canon Pages: 30
DASCO EBS-260 Cleaning Procedure preview
EBS-260
Brand: DASCO Pages: 2
TallyGenicom T6212 Operator'S Manual preview
T6212
Brand: TallyGenicom Pages: 92
UBI EasyCoder 501 SA Service Manual preview
EasyCoder 501 SA
Brand: UBI Pages: 214
UBI EasyCoder 401 Technical Manual preview
EasyCoder 401
Brand: UBI Pages: 64
Canon imageRUNNER ADVANCE DX 6870i Service Manual preview
imageRUNNER ADVANCE DX 6870i
Brand: Canon Pages: 115
Canon imagerunner advance C5550i User Manual preview
imagerunner advance C5550i
Brand: Canon Pages: 1556
MakerBot Smart Extruder+ Manual preview
Smart Extruder+
Brand: MakerBot Pages: 7
Xerox Phaser 6300 Service Manual preview
Phaser 6300
Brand: Xerox Pages: 13
Rena AS-150 Service Manual preview
AS-150
Brand: Rena Pages: 59
Xerox DocuPrint 4517 User Manual preview
DocuPrint 4517
Brand: Xerox Pages: 288
Felix Storch 3.1 Single Assembly Manual preview
3.1 Single
Brand: Felix Storch Pages: 46
Lexmark C53x Clearing Jams Manual preview
C53x
Brand: Lexmark Pages: 6

Brands by name

Popular brands

Load more brands