Sharp MX-B380P Operation Manual Download Page 52

Page: 52 / 249

1-49

BEFORE USING THE MACHINE

This section explains how to clean the machine and replace the toner cartridges and the toner collection container.

REPLACING THE TONER CARTRIDGES

When it is time to replace a supply item, a message instructing you to replace the item will appear in the display.

MAINTENANCE

• Do not replace a supply item before the replacement message appears in the display.

• After using up a cartridge, pack it with the packing case, packing material and bag that are used for the original cartridge.

Open the front cover.

Pull the toner cartridge toward you.

Summary of Contents for MX-B380P


























































































































































































































































Search results

Summary of Contents for MX-B380P

Reviews:

Related manuals for MX-B380P

Brands by name

Popular brands

Sharp MX-B380P, Operation Manual

Search results

Summary of Contents for MX-B380P

Reviews:

Related manuals for MX-B380P

Brands by name

Popular brands