Sharp MX-7090N, User Manual

Page: 296 / 789

2-136
COPIER ► OTHER FUNCTIONS
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB
ADJUST)
This function heightens or lightens any one of the three color components R (red), G (green), and B (blue).
RGB must be specified before scanning the original.
1
Tap the [Others] key, and tap the [RGB Adjust] key.
2
Tap the key of the color you want to adjust.
3
Tap or slide the slider to adjust
the coloring.
After the settings are completed, tap twice.
• Only one color can be adjusted. (If you adjust one color and then tap another color, the adjustment of the first color is
canceled.)
• To cancel the RGB adjust setting:
Tap the [Off] key.
4
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-90)
► DOCUMENT GLASS (page 1-92)
To cancel all settings:
Tap the [CA] key.
5
Tap the [Color Start] key to start copying.
R(Red)+
G(Green)+
B(Blue)+
6 8
4
3
8½x11 5½x8½
8½x11 8½x11
8½x11 8½x11
8½x14
11x17
Exposure
Select Type/Exposure
Color Mode
Change Size/Direction.
Original
Adjust Color Tone
Color Balance
Adjust Intensity
Intensity
Proof Copy
Others
Preview
Start Start
Back
RGB Adjust
Any one colour can be adjusted.
This setting is only applied to colour.
Off
R(Red)
G(Green)
B(Blue)
Touch [+] to darken and [-] to lighten
selected colour tone.
-1 -2 0 1 2
CA
B/W Color