Sharp MX-7090N User Manual Download Page 10

Page: 10 / 789

1-7

BEFORE USING THE MACHINE

►

BEFORE USING THE MACHINE

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT

GLASS

(1)

Document feeding cover

Open this cover to remove an original misfeed.

(2)

Original guides

These guides help ensure that the original is scanned
correctly.
Adjust the guides to the width of the original.

(3)

Document feeder tray

Place the original.
Place the original with the print side facing up.

►

AUTOMATIC DOCUMENT FEEDER (page 1-90)

(4)

Original exit tray

The original is discharged to this tray after scanning.

(5)

Scanning area

Originals placed in the automatic document feeder tray
are scanned here.

►

SCANNING AREA (page 1-143)

(6)

Original size detector

This unit detects the size of an original placed on the
document glass.

►

DOCUMENT GLASS (page 1-92)

(7)

Document glass

If you want to scan books or other thick originals that
cannot be fed through the automatic document feeder,
place them on this glass.

►

DOCUMENT GLASS (page 1-92)

(1)

(3)

(5)

(6)

(7)

(2)

(4)

Summary of Contents for MX-7090N






















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands

Sharp MX-7090N, User Manual

Search results

Summary of Contents for MX-7090N

Reviews:

Related manuals for MX-7090N

Brands by name

Popular brands