Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 93 / 576

Share

Page: 93 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 93

92

Initialize and/or Store Settings

The current system settings can be stored, previously stored system settings can be retrieved, and the factory default
system settings can be restored. Touch the [Initialize and/or Store Settings] key to configure the settings.

Restore Factory Defaults

This is used to return the system settings to the factory
default settings. If you wish to create a record of the
current settings before restoring the factory default
settings, print the current settings using "

(Administrator)

" (page 85) in the system settings

(administrator).

Store Current Configuration

This is used to store the currently configured system
settings. The stored settings will be retained even if the
[POWER] key (

) is turned off. To retrieve the stored

settings, use "

Restore Configuration

" below.

Items not stored

• Network Settings: These are not stored as unexpected

settings may cause damage to the
network.

• Product Keys:

Product Keys are not stored as
reissue of keys may be necessary.

Restore Configuration

Use this to restore settings stored with "

The current settings will change to the retrieved settings.

After executing the reset, exit the system settings, turn
off the [POWER] key (

), wait a brief interval, and

then turn the [POWER] key (

) back on to make

the factory default settings take effect.

«
...
91
92
93
94
95
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments