Sharp MX 5500N - Color Laser - Copier, User Manual, Page: 503 / 576

Share

Page: 503 / 576

Sharp MX 5500N - Color Laser - Copier User Manual Download Page 503

5

This chapter provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)

Finisher / saddle stitch finisher*

This can be used to staple output. The saddle stitch
finisher can automatically staple output at the center line
and fold the pages to create a pamphlet.

☞

FINISHER / SADDLE STITCH FINISHER

(2)

Punch module*

This is used to punch holes in output.

☞

(3)

Inserter*

Paper loaded in the inserter can be inserted into output
from the machine as covers and inserts.

☞

(page 58)

(4)

Automatic document feeder

This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.

☞

PLACING THE ORIGINAL

(5)

Front cover (upper)

Open this to replace a toner cartridge or clear a paper
misfeed from the paper pass unit.

☞

REPLACING THE TONER CARTRIDGES

(6)

Front cover (lower)

Open this to switch the main power on and off.

☞

TURNING THE POWER ON AND OFF

☞

(page 62)

(7)

Operation panel

This is used to select functions and enter the number of
copies.

☞

OPERATION PANEL

(8)

Right Tray

Output can be delivered to this tray.

(9)

Output tray (center tray)

Output is delivered to this tray.

* Peripheral device.

1

BEFORE USING THE MACHINE

(1)

(2)

(3) (4)

(5)

(7) (8)

(9)

(6)

When a finisher /
saddle stitch finisher
is not installed

When a finisher is
installed

«
...
501
502
503
504
505
...
»

Summary of Contents for MX 5500N - Color Laser - Copier

































































































































































































































































































































































































































































































































































































Reviews:

No comments