Sharp MX 3501N - Color Laser - Copier User Manual Download Page 98 | Manualshive

Page: 98 / 843

background image

96

Copy Settings

The following settings are related to copying. Touch the [Copy Settings] key and configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

Initial Status Settings

The copier settings are reset when the [POWER] key
(

) is turned on, when the [CLEAR ALL] key (

) is

pressed, or when the auto clear interval has elapsed.
These settings are used to change the default settings
for copy mode. The following settings can be changed:

• Color Mode
• Paper Tray
• Exposure Type
• Copy Ratio
• 2-Sided Copy
• Output (output method and output tray)

Touch each key and configure the settings.
If you wish to return a changed default setting to the
original setting, touch the [Return to the Factory Default
Setting] key.

Exposure Adjustment

This is used to adjust the exposure level when "Auto" is
used for the copy exposure.
Touch the [Color] key or the [B/W] key, select the
exposure level with the

keys for both the

document glass and the automatic document feeder, and
touch the [OK] key. Lower the level toward "1" for lighter
exposure or raise the level toward "9" for darker exposure.

Rotation Copy Setting

When the original and paper are placed in different
orientations, this function automatically rotates the image
90 degrees to enable correct copying on the paper.
To enable this setting, select the checkbox

and

touch the [OK] key.

Add or Change Extra Preset Ratios

Two enlargement preset ratios (101% to 400%) and two
reduction preset ratios (25% to 99%) can be added. An
added preset ratio can also be changed.

Select the "Reduction" key or the "Enlargement" key,
specify the value with the

keys, and touch the

[OK] key. (To make the number change quickly, keep
your finger on the

or

key.)

Setting a Maximum Number of
Copies

This is used to set the maximum number that can be
entered for the number of copies (number of continuous
copies). Any number from 1 to 999 can be specified.
Enter the number with the numeric keys and touch the
[OK] key.

If this setting is used to change the default setting for
the duplex function to other than "1-Side to 1-Side"
and the duplex function or automatic document feeder
fails or is disabled, the setting will revert to "1-Side to
1-Side".

• Rotation copy will operate only if Auto Paper

Selection or Auto Image has been selected.

• The Rotation Copy setting must be enabled when

copying 5-1/2" x 8-1/2" (A5) size original on
5-1/2" x 8-1/2"R (A5R) paper.

Preset ratios other than added preset ratios cannot be
changed.

System Settings

Add or Change Extra Preset Ratios

Reduction

(25 99)

(101 400)

Enlargement

OK

«
...
96
97
98
99
100
...
»

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX 3501N - Color Laser - Copier

Brand: Magicard Pages: 6

Brand: Oce Pages: 192

Brand: Oce Pages: 22

Brand: Oce Pages: 41

Brand: Oce Pages: 28

Brand: Oce Pages: 6

Brand: QMS Pages: 104

Brand: Oce Pages: 386

Brand: Oce Pages: 2

Brand: Oce Pages: 27

Brand: Oce Pages: 324

Brand: Oki Pages: 16

Brand: Olivetti Pages: 179

Brand: Olivetti Pages: 36

Brand: Oki Pages: 679

Brand: Oki Pages: 40

Brand: OKIDATA Pages: 308

Brand: OKIDATA Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands