Sharp MX 3501N - Color Laser - Copier User Manual Download Page 89

Page: 89 / 843

Items stored in favorite operation groups

User Count Display

This displays the total number of pages printed by each
user.

Select the desired user.
When the user is selected, the following screen will
appear.

Misfed paper is not included in the counts. When fax,
Internet fax, or network scan is used, the transmitted
page count is also displayed.

User Count Reset

Use this to reset user counts to "0".

(A) To reset the counts of a selected user, select the user and

touch the [Selected User] key.

(B) To reset the counts of all users, touch the [All Users] key.

Item

Settings

Copy

Initial Status
Settings

Select settings for Color Mode,
Paper Tray, Exposure Type, Copy
Ratio, Duplex, and Output.

Image Send

Initial Status
Settings

Select settings for Resolution,
Exposure, and File Format.

Fax Default Own
Number and Name
Setting

Store the default fax sender name
and number.

Document Filing

Scan to HDD:
Initial Status
Settings

Select settings for Color Mode,
Resolution, Exposure, and
Compression Ratio.

Document Filing
Print:
Default Output
Tray Setting

Set the default output tray for
document filing.

System Settings

Display Language
Setting

Set the display language.

Key Operation
Setting

Set the time to key touch entry and
Auto Key Repeat setting.

Keys Touch Sound

Set the sound made when keys are
touched.

Customize Key
Setting

Set customized keys for each
mode.

Original Size
Detector Setting

Select whether inch sizes or AB
sizes are detected, or disable
detection on the document glass.

Counts of devices that are not installed do not appear.

User Count Display

Select users whose counts are to be displayed.

User

ABC

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

All Users

AAA AAA

CCC CCC

EEE EEE

GGG GGG

BBB BBB

DDD DDD

FFF FFF

HHH HHH

Default User

User Count Display

User Name :HHH HHH

001/200

Copies

(Page Limit)

Prints

(Page Limit)

Prints(Doc.Filing)

(Page Limit)

B/W

F. Color

2 Color

S. Color

787,070

(--,---,---)

3,279,420

(37,000,000)

10,032,101

(37,000,000)

62,569,875

(--,---,---)

00,000,000

(00,000,000)

36,914,712

(37,000,000)

11,223,421

(--,---,---)

14,736,932

(--,---,---)

24,681,000

(--,---,---)

1/3

User Count Reset

Select users whose counts are to be cleared.

Selected User

All Users

Default User

AAA AAA

CCC CCC

EEE EEE

BBB BBB

DDD DDD

FFF FFF

All Users

ABCD

EFGHI

JKLMN

OPQRST

UVWXYZ

ABC

User

(B)

(A)

Summary of Contents for MX 3501N - Color Laser - Copier












































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands

Sharp MX 3501N - Color Laser - Copier, User Manual

Search results

Summary of Contents for MX 3501N - Color Laser - Copier

Reviews:

Related manuals for MX 3501N - Color Laser - Copier

Brands by name

Popular brands