manualshive.com logo in svg

Sharp MX-3070N, User Manual

Share
Download
Sharp MX-3070N User Manual Download Page 361

3-85

PRINTER

►

DIRECTLY PRINTING FROM A COMPUTER

SUBMIT PRINT JOB

By selecting [Document Operations] 

→

 [Submit Print Job] from "Setting mode (Web version)" and specifying a file, you 

can directly print the file without using the printer driver.
In addition to a file on your PC, this procedure can be used to print any file that can be accessed from your PC, such as 
a file on another PC connected to the same network.
For the procedure for accessing the "Setting mode (Web version)", see "

SETTING MODE (page 7-3)

".

FTP Print

You can print a file from your PC by simply dragging and dropping the file onto the FTP server of the machine.

Performing FTP print

Type "ftp://" and then the IP address of the machine in the address bar of your PC's Web browser as shown below.

Example: ftp://192.168.1.28

Drag and drop the file that you wish to print onto the "lp" folder that appears in your Web browser. Printing of the file 
automatically begins.

E-mail Print

If you configure your e-mail account in the machine, the machine periodically checks your mail server and automatically 
prints received e-mail attachments without using the printer driver.

DIRECTLY PRINTING FROM A COM-

PUTER

• If you print a file that includes print settings (PCL or PS file), the settings will be applied.
• When user authentication is enabled in the settings of the machine, the print function may be restricted. For more 

information, ask your administrator.

To perform FTP print:
In "Setting mode (administrator)", select [System Settings] 

→

 [Printer Settings] 

→

 [Print Setting from PC/Mobile Terminal], 

set [FTP Print] to [Valid], and then configure the port number. (Administrator rights are required.)

• If you print a file that includes print settings (i.e., PCL, PS), the settings will be applied.
• When user authentication is enabled in the settings of the machine, the print function may be restricted. For more 

information, ask your administrator.

To perform e-mail print:
In "Setting mode (administrator)", select [System Settings] 

→

  [Printer Settings] 

→

 [E-mail Print Settings], and register your 

e-mail account. (Administrator rights are required.)

Summary of Contents for MX-3070N




























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands