Sharp MX 3070 Troubleshooting Manual Download | Manualshive

Page: 28 / 56

background image

28

Printing Problems

THE IMAGE IS UPSIDE DOWN

Are you using a type of paper (envelopes, punch paper, etc.) that can
only be loaded in a fixed orientation?

Is the correct binding position selected for 2-sided printing?

MANY GARBLED CHARACTERS
ARE PRINTED

Is your computer or the machine in an unstable state?

PRINTING DOES NOT TAKE PLACE

Check

Solution

Is your PC connected correctly to the
machine?

■

Make sure that the cable is connected securely to the LAN connector of your PC
and that of the machine.

If you are connected to a network, make sure that the LAN cable is securely
connected to the hub as well.

►

Power and connector positions (page 4)

Is the machine connected to the same
network (LAN, etc.) as your PC?

■

The machine must be connected to the same network as your PC.

If you do not know which network the machine is connected to, ask the network
administrator.

Is the IP address selected correctly?
(Windows)

■

Check the IP address setting.

If the machine does not have a permanent IP address (the machine receives an
IP address from a DHCP server), printing will not be possible if the IP address
changes.

You can check the machine's IP address in [Network Status] of setting mode. If
the IP address has changed, change the port setting in the printer driver.



"Setting mode"

→

[Status]

→

[Network Status]

See: Software Setup Guide
If the IP address changes frequently, it is recommended that a permanent IP
address be assigned to the machine.



"Setting mode (administrator)"

→

[System Settings]

→

[Network Settings]

Are you using a printer port created
using Standard TCP/IP Port?
(Windows)

■

Check the PC settings.

When a port created with Standard TCP/IP Port in Windows is used and the
[SNMP Status Enabled] checkbox is

, it may not be possible to print correctly.

Change the [SNMP Status Enabled] checkbox to

.

See: Software Setup Guide

Is your computer in an unstable
state?

■

Restart your computer.

Printing is sometimes not possible when you run multiple applications at once or
there is insufficient memory or hard drive space. Restart your computer.

Is the machine specified correctly in
the application that you are using for
printing?

■

Check whether the machine's printer driver has been selected from the print
window of the application.

If the machine's printer driver does not appear in the list of available printer
drivers, it may not be installed correctly. Remove the printer driver and then
install it once again.

See: Software Setup Guide

Are the network connection devices
operating normally?

■

Make sure that the routers and other network connection devices are operating
correctly.

If a device is not powered on or is in an error state, see the manual of the device
to correct the problem.

Alert Message

Check

Page

?

?

!

«
...
26
27
28
29
30
...
»

Summary of Contents for MX 3070

























































Reviews:

No comments

Related manuals for MX 3070

Brand: DataCard Pages: 8

Brand: DataCard Pages: 8

Brand: DataCard Pages: 3

Brand: Nanoptix Pages: 25

Brand: Nanoptix Pages: 4

Brand: Oce Pages: 192

Brand: Oce Pages: 22

Brand: Oce Pages: 41

Brand: Oce Pages: 28

Brand: Oce Pages: 6

Brand: QMS Pages: 104

Brand: Oce Pages: 386

Brand: Oce Pages: 2

Brand: Oce Pages: 27

Brand: Oce Pages: 324

Brand: Copystar Pages: 4

Brand: Oki Pages: 120

Brand: DAKEWE Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands