background image

SPECIAL WARNING

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

CLEARANCES ANd dImENSIoNS

For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated 

clearances and dimensions on page 2. See Figure 1.

Microwave Drawer

InstallatIon Manual

UNPACkING yoUR mICRoWAvE dRAWER

•  

Remove all packing 

materials from inside 

t h e  M i c r o w a v e 

Drawer. DO NOT 

R E M O V E  T H E 

W A V E G U I D E 

COVER, which is 

located on the top 

of the Microwave 

Drawer. 

•  

Remove the feature 

sticker, if there is one. 

Check the drawer for 

any damage, such as 

misaligned or bent drawer, damaged drawer seals and sealing 

surfaces, broken or loose Microwave Drawer guides and dents 

inside the cavity or on the front side of the drawer. If there is 

any damage, do not operate the Microwave Drawer and contact 

your dealer or a SHARP AUTHORIZED SERVICER.

ImPoRtANt NotES to thE INStALLER

  •  

Read all of the Installation Manual before installing the 

Microwave Drawer.

  •  

Remove all packing material before connecting the electrical 

supply.

  •  

Observe all governing codes and ordinances.

  •  

Be sure to leave these instructions with the consumer.

ImPoRtANt NotES to thE CoNSUmER

Keep this manual with your Operation Manual for future 

reference.
 

•  

As when using any microwave oven generating heat, there 

are certain safety precautions you should follow. These are 

listed in the Operation Manual. Read all and follow carefully.

 

•  

Be sure your Microwave Drawer is installed and grounded 

properly by a qualified installer or service technician.

ImPoRtANt SAfEty INStRUCtIoNS

 If the information in this manual is not followed 

exactly, a fire or electrical shock may result that could cause 

property damage, personal injury or death.

 To reduce the risk of tipping, the Microwave 

Drawer must be secured by a properly installed Anti-Tip 

block.
 

•  

This Microwave Drawer must be electrically grounded in 

accordance with local codes.

 

•  

Make sure the wall coverings and the cabinets around the 

Microwave Drawer can withstand the heat generated by the 

Microwave Drawer.

 Never leave children alone or unattended in 

the area where a Microwave Drawer is in use. Never leave the 

drawer open when the microwave is unattended.

 Stepping, leaning or sitting on the drawer may 

result in serious injuries and can also cause damage to the 

Microwave Drawer.
 

•  

Do not use the Microwave Drawer as a storage space. 

This creates a potentially hazardous situation.

 

•  

Check that the time-of-day is in the display. If not, touch 

Stop/Clear to prevent unintended use.

1

Waveguide 

cover

Sealing 

surface

Oven 

cavity

Sealing 

surface

Summary of Contents for Microwave Drawer Series

Page 1: ... these instructions with the consumer Important notes to the Consumer Keep this manual with your Operation Manual for future reference As when using any microwave oven generating heat there are certain safety precautions you should follow These are listed in the Operation Manual Read all and follow carefully Be sure your Microwave Drawer is installed and grounded properly by a qualified installer ...

Page 2: ...lectrical supply Your oven can be built into a cabinet or wall by itself or under a gas or electric wall oven Be sure that the clearance of the floor between the wall oven and the microwave drawer is a minimum of 2 inches 24 Microwave Drawer Measurements Figure 1 Figure 2 Figures1and2containmanyMicrowaveDrawermeasurements for reference when planning the drawer s location This Microwave Drawer can ...

Page 3: ...eptacle that is properly installed and grounded Should you only have a 2 prong outlet have a qualified electrician install a correct wall receptacle Note If you have any questions about the grounding or electrical instructions consult a qualified electrician or service person Can also be installed using an electrical outlet in an adjacent cabinet within the area where the provided electrical cord ...

Page 4: ...ION 1 Sharp Plaza Suite 1 Mahwah New Jersey 07495 1123 1 800 BE SHARP 237 4277 Model and serial number location The name plate includes model and serial number Open the Microwave Drawer fully The label is beyond the back wall of the microwave cavity facing up from the flat surface Care cleaning and maintenance Refer to the Operation Manual for cleaning instructions Before you call for service Read...

Reviews: