MD-SR60
– 2 –
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
SPECIFICATIONS
Specifications for this model are subject to change without prior
notice
Output level:
Dimensions:
Width: 3-15/16" (99.9 mm)
Height: 29/32"(22.9 mm)
Depth: 3-3/32" (77.9 mm)
Weight:
0.42 lbs.(191 g ) with rechargeable
battery
Input socket:
Line/optical digital, microphone
(powered by the main unit)
Output socket:
Headphones (impedance: 16 ohms)/
remote control unit
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semiconductor
laser pick-up
Audio channels:
Stereo 2 channels/monaural (longplay
mode) 1 channel
Frequency response:
20 - 20,000 Hz (
±
3 dB)
Rotation speed:
Approx. 400 - 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
Coding:
ATRAC (Adaptive Transform
Acoustic Coding), 24-bit computed
type
Recording method:
Magnetic modulation overwrite
method
Sampling frequency:
44.1kHz (32 kHz and 48kHz signals
are converted to 44.1kHz, and then
recorded)
Wow and flutter:
Unmeasurable
(less than
±
0.001% W. peek)
General
Power source:
DC 1.2V: Rechargeable Nickel-Metal Hydride
battery (AD-N70BT) x 1
DC 5V :
AC adaptor (AC 120V, 60 Hz)
DC 1.5V: Commercially available, "AA" size
(LR6), alkaline battery x 1
DC 4.5V: Separately available car adaptor,
AD-CA20X (for cars with a 12-24V
DC negative ground electrical
system)
Power consumption: 7W (AC adaptor)
Output power:
RMS; 20 mW (10 mW + 10 mW) (0.2 % T.H.D.)
Charging time:
Approx. 3.5 hours (90%)
Approx. 5.5 hours (fully charged)
(When using the AC adaptor included with the unit)
Battery life:
The continuous recording time is for analog input when the
volume level is set to "VOL 0"
The continuous play time shows the value when the volume level
is set to "VOL 15"
The above values are the standard values when the unit is
charged and used at an ambient temperature of 68˚F (20˚C).
The operation time when using an alkaline battery may be
different, depending on the type and manufacturer of the battery
and on the operating temperature.
Input sensitivity:
MIC H
0.25 mV
10 kohms
MIC L
2.5 mV
10 kohms
LINE
100 mV
20 kohms
Recording
level
Reference
input level
input
impedance
When using a commercially available,
high capacity, "AA" size (LR6),
alkaline battery
When using the rechargeable batter
(full charged) included with the unit
Continuous recording
Approx. 3 hours
Continuous recording
Approx. 4.5 hours
Continuous play
Approx. 7 hours
Continuous play
Approx. 6.5 hours
Headphones
—
10 mW + 10 mW 16 ohms
LINE
250 mV (-12 dB)
—
10 kohms
Maximum
output level
Load
impedance
Specified
output
Summary of Contents for MDSR60S - Minidisc Player/Recorder
Page 47: ...MD SR60 M E M O 8 ...
