Sharp MD-MT90H, Operation Manual

Page: 130 / 140

ENGLISH
00/12/27 E_90seeg_5.fm
E-35
Ad
v
a
nced Features
-E
dit
ing a
Recor
d
e
d
MiniD
isc-
Editing a Recorded MiniDisc (continued)
„
To move a track When a track has a name before dividing:
The two new tracks will have the same name. However, in
the TOC FULL condition, the second track may not be
named.
Total number of tracks that can be divided:
Each disc can hold up to 255 tracks. However, even if the
number of assigned tracks has not reached 254, it might
not be possible to make any further divisions of tracks.
To combine two non-adjacent tracks:
First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine them
using the COMBINE function.
When one or both tracks to be combined have
a name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
In the following cases, tracks may not be com-
bined.
z
Digital recorded track and analogue recorded track.
z
Long play recorded track and stereo recorded track.
z
Tracks whose recording time is less than 12 seconds.
1
Play the track to be moved, and press the PLAY/
PAUSE button.
2
Press the EDIT button repeatedly to select
"MOVE".
3
Press the ENTER/SYNC button.
To cancel the operation, press the /:OFF button.
4
Press the or button to select the direc-
tion.
5
Press the ENTER/SYNC button again.
The track will be moved, and the unit will be paused
at the beginning of the track.