02/11/7 MD_MT270H_SEEG_E5.fm
E-25
MD-MT270H
ENGLISH
Ad
v
a
nced Features
-T
it
li
n
g
a
M
in
iD
is
c
-
Titling a MiniDisc (continued)
!
To add characters
!
Stamping titles from another MiniDisc
Before stamping
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc and track names) of the Master MiniDisc to another
MiniDisc (for stamping).
1
Put the unit in the character input mode.
(Perform steps 1 - 5 on page 23.)
2
Press the VOL + or VOL - button to move the cur-
sor to the character before which you want to add
a new character.
3
Select the character to add.
(Perform steps 6 - 8 on page 23.)
4
Press and hold down the MENU/ENTER button for
2 seconds or more.
"
"TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.
"
You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.
1. What is a master MiniDisc?
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
2. What is a MiniDisc for stamping?
A MiniDisc that contains the same tracks in the same or-
der as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
