103
SH-03C_e_07.fm
[103/106]
Convenient Functions
Enable Bluetooth function in advance (
n
P. 61).
To register/connect a Bluetooth device, the
Bluetooth passkey may need to be entered.
Before starting the registration, decide the 4- to
16-digit number. Enter the same number on the
FOMA terminal and the other party’s Bluetooth
device.
1
In the home screen,
z
/
[Settings]
/
[Wireless &
networks]
/
[Bluetooth settings]
2
Select an item
Bluetooth
: Enable Bluetooth function.
Register New Device
: Search for the
Bluetooth devices around the FOMA terminal
and register them in it.
･
Set the other party’s Bluetooth device to the
registration stand-by status in advance.
List of Registered Devices
: Display the
registered Bluetooth devices as a list. You
can select a device to connect.
Receive Data
: Receive data using Bluetooth
connection.
Detailed Bluetooth Settings
: Set Bluetooth
function.
Bluetooth settings
[Bluetooth]
When the Bluetooth function is enabled, the
FOMA terminal is set to receive a registration
request/connection request from other
Bluetooth devices. Set Search Permission of
Detailed Bluetooth Settings to [Accept] in
advance to allow the FOMA terminal to be
searched for by other Bluetooth devices.
While in connection stand-by, even if a
connection request from a Bluetooth device is
received, connection may not be made
depending on the signal strength etc.
[Register New Device]
You can register up to 20 Bluetooth devices.
Searching is not available while connecting to
Bluetooth devices.
For details on the operations of the other party’s
Bluetooth device, refer to the manuals of the
Bluetooth device to be used.
[List of Registered Devices]
You can connect up to two devices
simultaneously. However, the combination of
hands-free (headset) and audio is the only
combination that can be used at the same time.
You cannot hear the audio sound during a
hands-free call.
If you fail to connect, connection may become
available after re-registration of Bluetooth
devices.
[Receive Data]
When receiving data, the connection to the
profile other than OPP is disconnected.
Note that if you select [Delete All Before
Registration] at receiving all data, all data
registered to the target function are deleted.
Some data cannot be received all.
When available memory space in the save
destination becomes insufficient, the data being
received to that point are saved and receiving
ends.
SH-03C_e.book 103 ページ ２０１０年１１月１６日 火曜日 午後４時５１分
