Sharp LC-90LE740X Aquos, Service Manual

Page: 38 / 74

LC-90LE740X
5 – 20
15) 232C power ON control [232C POWON]
16) Public mode setting [PUBLIC MODE]
Option “ENABLE” or “DISABLE” (loop enabled)
Default DISABLE
Function
The item decide whether Power ON by the 232C command is enabled/disabled in the standby state.
The same function as 232C command “RSPW”.
ENABLE
DISABLE
: POWR0001 is always enabled.
: Start-up may be impossible at POWR0001.
(If the 232C command reception module is set to OFF, the command is invalid.)
Option “OFF” or “ON” (loop enabled)
Default OFF
Function
The item decide whether Public mode setting menu are enabled or disabled.
The same item as [PUBLIC MODE] in the adjustment process menu.
OFF
ON
: Public mode is not active.
: Public mode is active.
Remarks Each operation of the Public mode is impossible unless this item is set to ON.