Sharp LC-62C42U Operation Manual Download

Page: 7 / 57

Supplied accessories

QUICK REFERENCE

CAUTION

•

Attach the stand in the correct direction.

•

Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Hex key

Short screw

Insert the stand into the openings on the

bottom of the TV.

Insert and tighten the 4 long screws into

the 4 holes on the rear of the TV.

Hex key

Long screw

Soft cushion

NOTE

• To detach the stand, perform the steps in reverse order.

Attach the two parts of the stand unit to each
other using the 4 short screws and the hex
key (supplied with the product) as shown.

Conﬁ rm that there are 8 screws (4 short
screws and 4 long screws) supplied with the
TV.

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

NOTE

• Always use the AC cord supplied with the TV.

Make sure the following accessories are provided with the product.

Remote control unit

(

Page 8

“AAA” size battery

(

Page 8

AC cord

(

Page 7

Stand unit

(

Page 6

Cable Clamp (

Cable tie (

Page 7

Operation manual

(

Summary of Contents for LC-62C42U


























































Search results

Summary of Contents for LC-62C42U

Reviews:

Related manuals for LC-62C42U

Brands by name

Popular brands

Sharp LC-62C42U, Operation Manual

Search results

Summary of Contents for LC-62C42U

Reviews:

Related manuals for LC-62C42U

Brands by name

Popular brands