-6-
Stand Installation
•
Attach the stand in correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in television overturns.
1. Put the television face down on a safe surface that is covered by a soft and smooth cloth. (Show in diagram 1)
2. Fix the television stand support to the television, fasten the screws by using a cross-head screwdriver (Not
supplied). (Show in diagram 2)
3. Fix the television stand base to the television, fasten the screws by using a cross-head screwdriver (Not
supplied). (Show in diagram 3)
INSTALLATION
1
2
3
(6pcs screws)
(4pcs screws)
CAUTION:
Do not push too hard or apply excessive pressure to the stand neck to avoid any damages when you turn the
television for the most comfortable viewing angle.
ANTENNA
ANT 75Ω
Note:
Aerial connections: IEC(female).
Input impendance: 75Ω unbalanced.
An outdoor antenna
NOTE:
- To detach the stand, perform the steps in reverse order.
- Screwdriver is not supplied with this product.
- Angle adjustment is not available for the LC-40LE433H.
Stand support
Stand
base
LC-40LE433H (SHARP香港 SY13050) 說明書英文R5.indd 6
2013-4-3 9:43:21
