Screen 1
When you first turn on the set, you will be welcomed by the First Time Installation screen as shown above.
Language: Select your preferred on-screen display language. This will change the language in which the menus and associated
information is displayed in. When the setup has been completed, this can be changed by selecting Menu > Settings > Language.
4
Fitting the stand
Connecting your set
First time installation
1
2
Screen 2
Tuning Mode: Select what you wish to tune via TV’s built-in tuner. You can choose from Freeview TV, Analogue TV and ALL
(Fr Analogue). At the next step, the set will tune in selected option.
Country: Select the correct country in which the set will be used in. This will enable the TV to correctly install the functions ap-
plicable in the country of use.
Environment: Use this option to select either Home or Store mode.
HOME MODE
is a power saving mode which reduces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
When in
STORE MODE
the picture will be brighter. An on-screen banner showing the sets functionality will appear on the screen
after 2 minutes.
Note: In Home Mode, the TV will switch itself to the standby mode after 4 hours in the event that the buttons on the remote
control or TV are not used.
Earphones
Earphone input
LAN*
Network
connection
Digital audio
Digital optical audio output
SCART
SCART
input
HDMI 1 (ARC)
HDMI input
HDMI 2
HDMI input
RF in
RF / TV aerial input
HDMI 3
HDMI input
USB x 2
USB port
AV in
Audio/video input
YPbPr
HD input (Ypbpr)
CI card in
Common interface module
For the stand installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a fl at and clean surface with the
panel facing downwards to avoid damage.
Setting up the TV set for the fi rst time
Connectivity
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
1
2
1
Back/Shortest
Front/Longest
2
4 x
3
4
1
2
3
Outdoor Digital
TV Aerial
1.
2.
Used for attaching the stand
to the TV set (fi g.2)
4 x
TV panel must be facing downwards.
Place the TV set on a fl at and clean surface with
the panel facing downwards to avoid damage.
When the stand feet are installed correctly the
stand feet will be longest at the front of the TV
and shortest at the back with the feet pointing
away from each other.
When the stand/feet are in the correct position, secure
the feet to the underside of the TV set using 4 screws
provided.
3
Powering On the TV
Switch on the television by pressing
the TV control stick located on the
TV set.
TV control stick
Insert the batteries supplied into the
remote control and press the standby
button to power on the TV.
TV Control Stick
Remote Control: Installing Batteries
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
Terms and conditions apply. Online registration only.
A
C
D
E
F
G
H
I
K
B
A
I
L
B
J
C
D
E
F
G
H
K
* The LAN/Ethernet port is used for Freeview HD services.
E A R P HO NE
SCART
J
L
SHA-QSW-0036 LC-32xI3x21K V3 print.indd 2
SHA-QSW-0036 LC-32xI3x21K V3 print.indd 2
25/09/2018 09:09:29
25/09/2018 09:09:29
