Sharp LC-32D42U, Service Manual

Page: 34 / 138

LC-32D42U/LC-37D42U
5 – 17
2.10. Code list for Standby Cause
Code Indication Description
1 RC_STNBY /* Standby set by remote control */
2 E_CCKMVT /* Abnormal voltage of CCKM line detected */
5 OUT_OF_R “/* While a PC display is on, unspecified input continued long time. */”
6 NO_OPERT /* Off caused by no operation */
7 NO_SIGNA /* Off caused by no signal */
8 PC_MODE1 /* Set by the PC power management mode 1 */
9 PC_MODE2 /* Set by the PC power management mode 2 */
A SLEEP_TM /* Set by off timer */
B E_NOMONI /* Incompatible monitor is connected to the AVC center. */
C OFF_232C /* Set by the command from RS232C */
E AVC_TACT /* Set by the front switch at the AVC center */
F BSBOOKED /* The pre-set time has passed since TV was turned on from standby by the BS timer. */
10 E_AVCFAN /* Fan failure at the AVC center */
11 E_BSSUBM /* Communication failure with the BS sub microcomputer (Not used) */
12 E_CVICIC /* CVIC failure */
13 E_AVCTMP /* Abnormal temperature at the AVC center */
14 E_1BITAU /* 1Bit-AMP failure */
15 E_MONIPW /* Monitor main power failure detected */
16 E_MONITR /* Monitor problem detected */
17 E_FNLOCK /* Fan lock for North America */
40 /* Failure in Digital Standby */