background image

 

SERVICE MANUAL

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the

safety and performance of the set.

This document has been published to be used for
after sales service only.
The contents are subject to change without notice.

OUTLINE AND DIFFERENCES FROM BASE MODEL

OUTLINE.................................................................... i

DIFFERENCES FROM BASE MODEL..................... ii

SAFETY PRECAUTION

IMPORTANT SERVICE SAFETY 

PRECAUTION...........................................................iii

PRECAUTIONS A PRENDRE LORS DE LA 

REPARATION .......................................................... iv

PRECAUTIONS FOR USING LEAD-FREE 

SOLDER ................................................................... v

CHAPTER 1. REMOVING OF MAJOR PARTS

[1] 

REMOVING OF MAJOR PARTS ...........................1-1

CHAPTER 2. ADJUSTMENT

[1] ADJUSTMENT 

PROCEDURE ...............................2-1

CHAPTER 3. OVERALL WIRING/BLOCK DIAGRAM

[1] 

OVERALL WIRING DIAGRAM ..............................3-1

[2] SYSTEM 

BLOCK 

DIAGRAM .................................3-2

CHAPTER 4. PRINTED WIRING BOARD ASSEMBLIES

[1] MAIN 

Unit...............................................................4-1

CHAPTER 5. SCHEMATIC DIAGRAM

[1] 

DESCRIPTION OF SCHEMATIC DIAGRAM .........5-1

[2] MAIN 

Unit...............................................................5-2

Parts Guide

TopPage

CONTENTS

In the interests of user-safety (Required by safety regulations in some countries) the set should
be restored to its original condition and only parts identical to those specified should be used

.

LCD COLOR TELEVISION

No. S89C1LC32A47A

LC-32A47L(A)

LC-32A47L(A)

MODEL

OUTLINE

This manual has been issued to cover the modifications of some parts in reference to the redesigned LCD panel
module of Model LC-32A47L.
In this Service Manual, the modifications from Model LC-32A47L (No. S79A4LC32A47L) are focused on. For what
is left out herein, please refer back to the Service Manual of the previous model LC-32A47L (No. S79A4LC32A47L).
This Service Manual should be referred to as from the July 2009 production units (serial numbers: ****51112 and on).

Summary of Contents for LC-32A47L

































Reviews: