Sharp LC-26GA4D, Service Manual

Page: 16 / 222

16
LC-26GA4D
LC-26GA4U
15. Remove the seven lock screws from the AV PWB, and detach the AV PWB.
16. Remove the one lock screw from EXT-SP PWB, and detach the EXT-SP PWB.
17. Remove the six lock screws from the LCD control PWB, and detach the LCD control PWB.
18. Remove the five lock screws from the power PWB, and detach the power PWB.
19. Remove the three lock screws from the inverter-GND PWB, and detach the inverter-GND PWB.
20. Remove the four lock screws from the inverter PWB, and detach the inverter PWB.
21. Remove the two lock screws from the 1-bit AMP. PWB, and detach the 1-bit AMP. PWB.
22. Remove the four lock screws form the speaker angle(right), and detach the speaker angle(right).
23. Remove the four lock screws form the speaker angle(left), and detach the speaker angle(left).
24. Remove the four lock screws form the center angle, and detach the center angle.
25. Remove the two lock screws from the RC/LED PWB, and detach the RC/LED PWB.
26. Remove the two lock screws from the LCD panel unit ass’y, and detach the LCD panel unit ass’y.
LCD Control PWB
Inverter GND PWB
POWER PWB
AV PWB Frame
AV PWB
EXT-SP PWB
Inverter-GND PWB
19
17
18
15
16
15
20
1-Bit Amp PWB
Speaker
Angle (L) Speaker
Angle (R)
Center Angle
R/C, LED PWB
21
26
22
24
25
23