Sharp LC-24DV250K Operation Manual Download

Page: 14 / 32

English

- 13 -

Note

: Lip Sync delay may occur during the timeshifting.

Radio record is supported. The TV can record
programmes up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
suf

cient, the recording may fail and the timeshifting

feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not plug out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Multipartition support is available. The maximum of
two different partitions are supported. The

rst partition

of the USB disk is used for PVR ready features. It also
must be formatted as the primary partition to be used
for the PVR ready features.
Some stream packets may not be recorded because
of signal problems, so sometimes video may freezes
during playback.
Record,  Play,  Pause,  Display  (for  PlayListDialog)
keys  can  not  be  used  when  teletext  is  ON.  If  a
recording  starts  from  timer  when  teletext  is  ON,
teletext is automatically turned off. Also teletext usage
is  disabled  when  there  is  an  ongoing  recording  or
playback.

Timeshift Recording

Press

(PAUSE) button while watching a broadcast

to activate timeshifting mode.In timeshifting mode, the
programme is paused and simultaneously recorded
to the connected USB disk. Press (PLAY) button
again to resume the paused programme from where
you stopped. Press the STOP button to stop timeshift
recording and return to the live broadcast.

Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse
feature before advancing the playback with the fast
forward option.

Instant Recording

Press

(RECORD) button to start recording an

event instantly while watching a programme. You can
press

(RECORD) button on the remote control

again  to  record  the  next  event  on  the  EPG.  In  this
case,  an  OSD  will  be  displayed,  indicating  the
programmed events for recording. Press   (STOP)
button to cancel instant recording.

Note

: You can not switch broadcasts or view the Media Browser

during the recording mode. While recording a programme or
during the timeshifting, a warning message appears on the
screen if your USB device speed is not suf

cent.

Watching Recorded Programmes

Select the

Recordings Library

from the

Media

Browse

r menu. Select a recorded item from the list (if

previously recorded). Press the

button to view the

Play Options

. Select an option then press

button.

Note: Viewing main menu and menu items will not be available
during the playback.

Press the (STOP) button to stop a playback and
return to the Recordings Library.

Slow Forward

If you press (PAUSE) button while watching recorded
programmes, the slow forward feature will be available.
You can use

button to slow forward. Pressing

button consecutively will change slow forwarding speed.

Recording Con

guration

Select the Recording Con

guration item in the

Settings menu to con

gure the recording settings.

Format Disk

: You can use Format Disk feature

for formatting the connected USB disk. Your pin is
required to use the Format Disk feature (default pin
is 0000).

IMPORTANT

: Note that ALL the data stored on the

USB disk will be lost and the disk format will be
converted to FAT32 if you activate this feature. If
your USB disk malfunctions, you can try formatting
the USB disk. In most cases formatting the USB disk
will restore normal operation; however, ALL the data
stored on the USB disk will be lost in such a case.

Note:

If “USB is too slow” message is displayed on

the screen while starting a recording, try restarting the
recording. If you still get the same error, it is possible that
your USB disk does not meet the speed requirements. Try
connecting another USB disk.

Media Browser Menu

You can play photo, music, and movie

les stored

on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing the MENU button
again will exit from this screen.

You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shuf

e Mode Operation

Start playback with

and

activate

TV plays next file and loop
the list.

Start playback with OK and

activate

the same

le will be played in a