1. Languages
Select your preferred on screen display language. This will change the language in
which the menus and associated information is displayed in. When set up has been
completed, this can be changed by selecting Menu > Settings > Language
3. Network setup
You can connect the TV to your broadband router or wire-
less network in order to take advantage of the Smart functions. If you connect the
TV to your router using an Ethernet cable (recommended) this step will be skipped.
Follow the on screen prompts to connect to your wireless network. You can set up
the Network connection later in the network menu.
5. TV Installation – Audio.
Depending on how you use / install your TV, select the appropriate setting. The sound
settings on the TV will adjust to suit the type of installation.
6. Default Source
Select the source which you use the most. If Digital TV (Freeview) is chosen, then at
the next step, the set will tune in and default to Digital TV (Freeview). If one of the
other sources is selected, then the set will not tune in at this stage and default to
that input. If it is required to tune the set in later, this can be achieved by selecting
Menu > Channels
4
Installing batteries
Connecting your set
First time installation
Button layout
4. Environment of Use
Home Mode:
For normal use, by default it is set to a power saving mode which re-
duces the energy used by up to 25% (by reducing the power to the LED/LCD panel).
This can be changed in the picture mode settings.
NOTE:
In Home Mode, the TV will switch itself to the standby mode after 4 hours in
the event that the buttons on the remote control or TV set are not used.
Store Mode:
For store display use. The picture is adjusted to optimum settings. The
store demonstration will appear on the screen automatically after two minutes.
1
2
3
4
5
6
2. Country Selection
Select the correct fl ag for the country in which the set will be used in. This will enable
the set to correctly install the functions applicable in the country of use.
Stop/Eject DVD
Play/Pause DVD
Volume up and menu right
Volume down and menu left
Programme/Channel up and menu up
Programme/Channel down and menu down
Displays Menu/OSD
Displays the input source menu
Standby Power On/Off
1
2
3
4
5
6
8
7
9
ST
ANDBY
9
6
8
5
7
4
3
2
1
Fitting the stand
For stand feet installation, there is one type of screw
provided as shown below.
To complete the stand installation you will require a
cross head screw driver.
Place the TV set on a fl at and clean surface with the
panel facing downwards to avoid damage.
L
R
1
1
4 x
3
4
1
2
L
R
2
Used for attaching the stand
to the TV set (fi g.2)
4 x
TV panel must be facing downwards.
Place the TV set on a fl at and clean surface with the panel facing
downwards to avoid damage, then fi x the stand feet shown.
The feet are marked L (left) and R (right).
Secure the stand feet to the underside of the TV
set using the 4 screws provided.
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
Terms and conditions apply. Online registration only.
Setting up the TV set for the fi rst time
Connectivity
Insert the batteries supplied into the remote control. The remote control should
automatically be paired with the TV set. If this is not the case, please refer to the
‘Pairing the remote control’ section of this Quick Start Guide.
1) Connect the TV to your power socket.
2) If you wish to use the TV to receive Freeview/Saorview channels,
connect the RF input from the TV to your outdoor Digital TV aerial.
If you do not wish to receive Freeview/Saorview, skip this step.
3
2
To receive Freeview channels, in particular Freeview HD channels, you will need a
Digital TV aerial and be in a good Freeview coverage area. You can check coverage for
your postcode at www.freeview.co.uk.
Please note that any Freeview HD channels found during tuning will be placed in
channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
* The Ethernet/LAN port is used for Freeview HD services and smart functions.
L
B
J
C
D
E
F
H
K
ETHERNET*
Network
connection
HDMI 1 (ARC)
HDMI input
SCART
SCART
Input
RF IN
RF / TV Aerial Input
Optical Digital Audio Digital Audio output
HDMI 2
HDMI input
2 x USB
USB port
Earphone
Earphone Input
CI CARD IN
Common Interface module
AV IN
Audio/Video Input
YPbPr
HD input (Ypbpr)
Outdoor Digital
TV Aerial
1.
2.
A
K
J
A
B
C
D
E
F
G
H
i
ARC
ETHERNET
1
SCART
RF IN
OPTICAL
DIGITAL
AUDIO OUT
USB
(2.0)
5V
500mA MAX
2
CI CARD IN
YPbPr IN
AV IN
EARPHONE
G
H
I
J
K
I
REC
DVD MENU
GOTO A-B ANGLE
REPEAT
DVD SETUP
REC
LIST
LC-24DHG6131KF SHA-QSW-0023.indd 2
LC-24DHG6131KF SHA-QSW-0023.indd 2
29/05/2018 09:31:52
29/05/2018 09:31:52
